Intellinet Network IP Camera Guía de usuario descargar pdf (Pagina 44)

NETWORK IP CAMERA User’s Guide

(3) Trigger Output

This is to configure digital output states and control script. Network IP Camera sends captured

image via E-mail or FTP server when connected external sensors detect events.

① External devices signal output

This is to supply voltage to output port when events are triggered. (This option is only

activated when you select “Activation of digital output” option in previous “Trigger

Condition” option.)

② Send captured image via E-mail

This is to designate a person to receive captured image via Email.

Network IP Camera sends captured image to designated E-mail address through SMTP server.

You may configure SMTP server and E-mail address where you want to receive. (E-mail

address must be composed within 50 bytes. 50 bytes are equal to 50 English characters.)

③ send captured image to FTP server

This is to send captured image from Network IP Camera when an event is triggered.

Enter ftp server IP address, User ID and Password and select directory to save image.

Image capture option limitation

Configuration for image capture option affects memory capacity. If you configure this option to excess

memory size, the Warning message “ Not enough memory…” appears.

The total image capture frame rate must be limited 45 fps due to memory size.

(Before event time + After event time) x Image capture frame rate must be under 45.

For example, in case you configure “Before event” as 3 seconds, “After event time” as 2 seconds an

“image capture frame” as 3fps, the total image capture frame rate is ( 3 + 2) X 3 = 15 fps.

If warning message appears, please reduce the value of the option.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 70 71

Sin comentarios

Intellinet Network IP Camera Guía de usuario Pagina 44