Intellinet 3-Port Parallel Print Server Manual de usuario descargar pdf (Pagina 81)

Click the “IP” button to enter the IP setting page. If

you need the print server to automatically get an IP from

DHCP server, select “Auto IP”. You also can select “Static

IP” to manually assign “IP Address”, “Subnet Mask” and

“Gateway” for the print server.

Click the “DHCP Server” button to enter the DHCP

server’s setting page. You can “Enable/Disable” the DHCP

server or set “Auto” and assign a range of IP addresses here.

The DHCP server is disabled by default. If Auto is selected,

the DHCP Server of print server will be enabled only when

there is no other DHCP Server within the network. When

“Enable” or “Auto” is selected, you have to configure

“Starting Address”, “Range”, “Subnet Mask”, “Gateway”

and “DNS”. The print server will assign a unique IP for

each client.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 138 139

Sin comentarios

Intellinet 3-Port Parallel Print Server Manual de usuario Pagina 81